HOMEProducts › NVision-k 5001

NVision-K 5001

NVision-K 5001

Use of Wide-View Window allows subject to relax during measurement, as looking into the window naturally with both eyes.

  • Catalog
  • Contact Us

Wide-View Window Avoids "Instruments Myopia"

Wide-View Window Avoids "Instruments Myopia"

Use of Wide-View Window allows subject to relax during measurement, as looking into the window naturally with both eyes can minimize instrument myopia.

No Auto Fogging Means "No Accommodation"

Measurement principle without autofogging function prevents subjects e.g. children from using accommodating.

Near vision Reading

Near vision Reading

Near reading tests can be performed with attached near reading card of standard accessories.

Clear 5.6 inch color monitor

Clear 5.6 inch color monitor

Built-in clear 5.6 inch color monitor that produces superb colorful display of the icons for easier identification to select your desired choices for measurement.

Data Screen Function

Measured data can be seen on the monitor without printing out.

SE Value Display Function (spherical equivalent values)

You can check accommodation of the measured eye with SE values.

Quick Printer with Automatic Cutter

Printing paper is automatically cut when it is released.

Auto Start Function

Starts measuring automatically when alignment meets measurement requirements.

IOL Measurement Function Installed

You can measure the IOL (Intraocular lens) implanted eye.

Minimum Pupil Diameter : 2.3 mm

Allows you to measure much smaller pupils than conventional units.

RS232C Setting Function

You can send the measurement data to an external computer through an interface.

Output Terminal

This terminal outputs an NTSC video terminal. If you connect an external monitor, you can observe the same image that appears on the internal monitor screen of Nvision-K 5001 simultaneously.

Refractive Measuring Range Sphere (S) -22~ 225D (step : 0.12/0.25D)
Cylinder (C) 0~±10D(step : 0.12/0.25D)
Axix (A) 0~180 (step : 1)
Keratometic Measuring Range Radius of Corneal Curvature 5.0~10.0mm (step : 0.01 mm)
Corneal Refraction 33.75~67.50 (step : 0.12/0.25D)
Cylinder 0~±9D
Axis 0~180°(step : 1°)
Vertex Distance 0, 10, 12, 13.5, 15 mm
Minimum Pupil Diameter φ2.3mm
PD Measurement Measurement range 10mm~85mm (step : 1 mm)
Printer Thermal line printer with automatic cutter (paper width 57 mm)
Internal Monitor 5.6 inch LCD monitor (color)
Shifting Range for Sliding Body back/forth ±17mm  right/left ±43mm  up/down ±15mm
Vertical Adj.Range for Chin Rest ±30mm
Dimensions 327 mm (W)×496 mm (D)×513 mm (H)
Weight approx 20 kg
Date Output RA232C interface
Video Terminal
Power Source AC100-240V, 50/60 Hz
Consumption 80 VA
Power Saving Function OFF, 3, 5, 10 min. (switchable)
Standard Accessories Model Eye,Printing Paper,Fuse,Pack of Chin Rest Papers,Chin Rest Paper Pins,Dust Cover,Dust Cloth,Fixation Target,Fogging Lens,Occluder,Near Point Target Unit,Power Cord,Operation Manual

Design and specifications are subject to change without notice.

  • Catalog
  • Contact Us

TOP